top of page

How To Lay Laminate Flooring

Laminate wood flooring made from modern materials is a widely used option for residential construction. It can withstand a lot of wear and tear, lasts a long time, and comes in various colors and designs. Many laminate flooring producers have patented their unique click-fit or tongue-and-groove fitting mechanism. This flooring is perfect for high-traffic areas since it requires less upkeep. Evaluating the sub-floor, particularly its moisture level, is essential.

Laminate flooring is often installed in the wrong direction due to widespread misunderstandings. It won't make a difference in the vast majority of setups. Your own tastes and opinions should be the primary consideration. We want to address the range of possible scenarios where this matters.

1. Prior to getting started.

Examining your laminate floor for flaws is a must before installing it. Do NOT INSTALL the floor if you detect any flaws. The installation of subpar flooring will invalidate the warranty of many manufacturers.

2. Laying Laminate Floors in Difficult Conditions.

The most common cause of laminate floor failure is poor installation circumstances. Moisture and sub-floor levels are the most crucial things to look for.

3. Preparing a Laminate Floor for Use.

Read the directions to ensure you have the necessary acclimatization time, although often it's 48 hours. Ensure each laminate flooring pack is on the ground before laying it over under-floor heating.

4. Location Of Sunlight.

Your laminate floor installation should not be affected by the placement of windows and doors. Wood floors should be laid perpendicular to the direction of incoming light. While it may impact the shade you choose, it should never sway your decision about how you apply it.

5. Laying Laminate Flooring

Learning to install laminate flooring is generally the same, albeit when specialized techniques are required. Before attempting an installation, it is highly advised to consult the manufacturer's documentation.

6. Laminated Floor Underlay.

Selecting the appropriate underlay for your laminate flooring is crucial. The underlay must have a wet-proof membrane when installed over a concrete subfloor.

7. Putting Down Boards Down The Length Of A Room.

In most cases, the floorboards will be laid so that their length is parallel to the rooms. There's logic to this: most expansion in solid wood flooring occurs across the grain. If you lay a board across the narrowest room area, the need for expansion will be minimized.

After the subfloor is in place, you may start clicking the floor boards together. You should use spacers to have a gap of 10 mm between your furniture and the wall. A laminate flooring store is a place to go if you're looking for a wide selection of door bars and accessories.

Laminate installers often make the mistake of trying to lay the material over a softer, cushioned surface, like vinyl. This may be truer in the kitchen and bathroom than in the living room or bedroom. It's possible that the previous floor softened or warped because of the high humidity there. A thin, rigid layer of plywood may be used as a level, strong substrate for an underlay and laminate flooring when replacing an old, worn-out floor. The previous flooring may need to be removed if it is damaged or is not level.





  • Instagram
  • Facebook
  • Twitter
  • LinkedIn
  • YouTube
  • TikTok
Email Support Photos_Square.png
bottom of page